English, Function instructions feature details, Where to measure – Klein Tools CL3100 User Manual
Page 2: How to select a function or feature
ENGLISH
VOLTS
: 1.3~750VAC
AMPS:
0.9~200 AAC
OHMS:
0
~40MΩ
Continuity
2.1~1000VDC
-1.8~-1000VDC
MAX/MIN
CL3100
V
AT
0
10
20
40
30
Apo
600V
200A
CAT IV
B
c
D
E
a
F
MAX/MIN
CL3100
V
AT
0
10
20
40
30
Apro
VOLTS
: 1.3~750VAC
AMPS:
0.9~200 AAC
OHMS:
0
~40MΩ
Continuity
2.1~1000VDC
-1.8~-1000VDC
Where to Measure
a.
Measure Voltage, resistance, and continuity here
•
Use leads of proper safety rating only (CAT III / CAT IV).
•
Do not attempt to measure more than 1000V DC or 750V AC.
•
Do not attempt to measure current with leads.
B.
Measure current here
•
Measure up to 200A AC.
• Measure when display shows
AUTO.
How to Select a Function or Feature
c.
Use to turn instrument oN / oFF, or select MaX / MIN.
• Press button for 2 seconds to power on or off.
• Press repeatedly to switch between maximum and minimum.
• Press button for 2 seconds to return to live reading from MAX/
MIN mode.
D.
Access resistance, continuity, and Backlight functions here.
• Press repeatedly to cycle through
AUTO (V / A), resistance,
and continuity modes.
• Press for 2 seconds to enable/disable backlight and worklight.
Other Things to Note:
E. Magnet
and Battery replacement are on back.
• When
indicator is displayed on the LCD,
batteries must be replaced.
• Turn off device and disconnect leads.
• Remove the back screw and replace 2 x AAA batteries.
• Attach magnet to metal surfaces for hands-free use.
F. Device features auto Power-off (apo)
• After 29 minutes non-use, the instrument will beep 3 times.
• After 1 more minute, the instrument will beep once and power
itself off to conserve battery power.
• Holding Va /
Ω button while turning on disables Auto Power-Off.
1. Voltage:
< 1000 V Dc or 750 V ac
FUNctIoN INStrUctIoNS
FEatUrE DEtaILS