Klein Tools CL2500 - Manual

cuStOMER SERVIcE
KLEIN tOOLS, INc.
450 Bond Street
Lincolnshire, IL 60069
www.kleintools.com
139677 Rev. 11/13 B
ENGLISH
• 1000A Ac/Dc
• tRuE RMS
• AutO / MANuAL
RANGE
• NON cONtAct
VOLtAGE tEStER
• MAX / MIN / HOLD
• ANALOG BAR GRApH
• 3-5/6 DIGIt
5999 cOuNt LcD
• BAcKLIGHt
• WORKLIGHt
ENGLISH
8. Non contact Voltage (NcV): > 25V Ac
SYMBOLS uSED ON LcD
~
Ac Measurement Dc Measurement
-
Negative Dc Value AT Auto Range Active
O.L. Overload: Range Exceeded Apo Auto power-Off Active
Low Battery HOLD Hold Active
MIN Minimum Reading MAX Maximum Reading
% Duty cycle Mode Frequency Mode
V Voltage Measurement A current in Amps
Ω Resistance in Ohms Diode test
F capacitance in Farads continuity test
Relative / Zero Mode n Nano 10 -9
µ Micro 10 -6 m Milli 10 -3
k Kilo 10 3 M Mega 10 6
ELEctRIcAL SpEcIFIcAtIONS
Dc Voltage Measurement
Range Resolution Accuracy
600mV ˜ 600V 0.1mV ˜ 0.1V ± (0.5% + 4 digits)
1000V 1V ± (0.8% + 10 digits)
Overload protection: 1000V
Ac Voltage Measurement
Range Resolution Accuracy
600mV ˜ 750V 0.1mV ˜ 1V ± (2.0% + 5 digits)
Overload protection: 750V RMS
Frequency Response: 45 to 400 Hz
Minimum Voltage for Frequency Measurement: 200mV
Response: True RMS
Dc current Measurement
Range Resolution Accuracy
600µA 0.1µA
± (1.2% + 3 digits)
2000µA 1µA
60A 0.01A ± (2.5% + 15 digits)
600A ~ 1000A 0.1A ~ 1A ± (1.5% + 8 digits)
Overload protection:
• Voltage: 600V RMS
• current: 2000µA (leads), 1000A (clamp)
Ac current Measurement
Range Resolution Accuracy
600µA 0.1µA ± (2.0% + 5 digits)
2000µA 1µA ± (1.5% + 5 digits)
60A 0.01A ± (2.9% + 15 digits)
600A ~ 1000A 0.1A ~ 1A ± (1.9% + 8 digits)
Overload protection:
• Voltage: 600V RMS
• current: 2000µA (leads), 1000A (clamp)
Frequency: 45 to 400Hz
Minimum current for Frequency Measurement: 400µA (leads) or 20A (clamp)
Response: True RMS
Resistance Measurement
Range Resolution Accuracy
600 Ω ˜ 6MΩ 0.1 Ω ˜ 0.001MΩ ± (1.0% + 4 digits)
60M Ω 0.01M Ω ± (2.0% + 4 digits)
Overload protection: 600V RMS
capacitance Measurement
Range Resolution Accuracy
60nF ˜ 6000µF 0.01nF ˜ 1µF ± (3.5% + 6 digits)
Overload protection: 600V RMS
Frequency Measurement
Range Resolution Accuracy
99.99Hz ˜ 499.9kHz 0.01Hz ˜ 100Hz ± (0.1% + 4 digits)
Overload protection: 600V RMS
Duty cycle Measurement
Range Resolution Accuracy
0.1 ˜ 99.9% 0.1% ± (0.2% per kHz + 0.1% + 5 digits)
Overload protection: 600V RMS
Diode test
Overload protection Range test current Open circuit Voltage
600V RMS 6.0V Appx. 0.25mA < 1.8V DC
continuity test
Overload protection Open circuit Voltage threshold (Appx.)
600V RMS < 0.44V ~40 Ω
Non contact Voltage Detector
On Voltage
Appx. 25V AC and above
WARRANtY
www.kleintools.com/warranty
cLEANING
Turn instrument off and disconnect test leads. Clean the instrument by using
a damp cloth. Do not use abrasive cleaners or solvents.
StORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage
in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before
using it.
DISpOSAL / REcYcLE
caution: This symbol indicates that equipment and its accessories
shall be subject to a separate collection and correct disposal.
750V
1000V
1000A
Dwg Name: CL2500-139677ART Dwg No: 139677
ECO No: 14678 Pkg Dwg Ref: 1650 Rev: B
Color Reference: CEN-PACK-003-A
Instruction Manual
CL 2500
CL2500 Instruction Manuals - MASTER.indd 1-4 11/20/2013 2:57:08 PM