Klein Tools MM1000 - Manual

cuStoMEr SErVIcE
KLEIN tooLS, INc.
450 Bond Street
Lincolnshire, IL 60069
www.kleintools.com
139543T Rev. 11/13 B
ENGLISH
Instruction Manual
• auto /
MaNuaL
raNGE
• MaX / MIN
• Bar GrapH
• Data HoLD
• 3-3/4 DIGIt
3999 couNt
LcD
• BacKLIGHt
• LEaD
HoLDEr
Duty º F º C
m
COM m
Temp
REL RANGE HOLD MAX/MIN
SELECT
V
AT
0 10 20 40 30
Apo
MM1000
ENGLISH
SYMBoLS uSED oN LcD
~
ac Measurement Dc Measurement
-
Negative Dc Value AT auto range active
O.L. overload: range Exceeded Apo auto power-off active
Low Battery HoLD Hold active
MIN Minimum reading MAX Maximum reading
% Duty cycle Mode Frequency Mode
V Voltage Measurement A current in amps
Ω resistance in ohms relative reading
F capacitance in Farads Diode test
°F Degrees Fahrenheit continuity test
n Nano 10 -9 °C Degrees celsius
m Milli 10 -3 µ Micro 10 -6
M Mega 10 6 k Kilo 10 3
º F º C Duty
º F º C Duty
PRESS
°F °C
Hz Duty
PRESS Duty º F ºC
m
COM m
Duty º F ºC
m
COM m
SELECT
º F º C Duty
Duty º F ºC
m
COM m
REL RANGE HOLD MIN/MAX
PRESS
6. Frequency (Hz) / Duty cycle < 1MHz
Features:
HoLD
7. temperature
Features:
• Do not apply voltage to thermocouple.
• Fahrenheit range: -58° to 1832°F
• Celsius range: -50° to 1000°C
ELEctrIcaL SpEcIFIcatIoNS
Dc Voltage Measurement
range resolution accuracy
400mV ˜ 400V 0.1mV ˜ 0.1V ± (0.5% + 4 digits)
1000V 1V ± (0.8% + 10 digits)
overload protection: 1000 V Input Impedance (Nominal): > 10 M Ω, < 100 pF
ac Voltage Measurement
range resolution accuracy
400mV ˜ 400V 0.1mV ˜ 0.1V ± (0.75% + 5 digits) 40Hz ˜ 400Hz
1000V 1V ± (1.0% + 8 digits) 40Hz ˜ 400Hz
overload protection: 1000V RMS Input Impedance (Nominal): > 10M Ω, < 100pF
response: Averaging
Dc current Measurement
range resolution accuracy
400µA ˜ 400mA 0.1µA ˜ 0.1mA ± (1.0% + 5 digits)
4A ˜ 10A 1mA ˜ 10mA ± (1.5% + 5 digits)
overload protection:
• µama Input: 400mA (F 440mA / 1000V fuse)
• a Input: 10A (F 11A / 1000V fuse)
ac current Measurement
range resolution accuracy
400µA ˜ 400mA 0.1µA ˜ 0.1mA ± (1.5% + 5 digits)
4A ˜ 10A 1mA ˜ 10mA ± (2.0% + 5 digits)
overload protection:
• µama Input: 400mA (F 440mA / 1000V fuse)
• a Input: 10A (F 11A / 1000V fuse)
Frequency: 40Hz to 400Hz
response: Averaging
resistance Measurement
range resolution accuracy
400 Ω ˜ 4M Ω 0.1 Ω ˜ 0.001M Ω ± (1.0% + 5 digits)
40M Ω 0.01M Ω ± (1.5% + 10 digits)
overload protection: 600V RMS
capacitance Measurement
range resolution accuracy
40nF 0.01nF
± (3.5% + 6 digits)
400nF ˜ 4000µF 0.1nF ˜ 1µF
overload protection (Voltage): 600V RMS
Frequency Measurement
range resolution accuracy
9.999Hz ˜ 999.9kHz 0.001Hz ˜ 0.1kHz ± (0.1% + 3 digits)
overload protection: 600V RMS Sensitivity: 0.7V RMS
Duty cycle Measurement
range resolution accuracy
0.1 ˜ 99.9% 0.1% ± (0.2% per kHz + 0.1% + 5 digits)
overload protection: 600V RMS
Frequency range: 0.5Hz to 100kHz, pulsewidth > 2μsec
temperature Measurement
range resolution accuracy
-58 ˜ 1832°F 0.1 ~ 1°F ± (3.0% + 5.4°F)
-50 ˜ 1000°C 0.1 ~ 1°C ± (3.0% + 3.0°C)
overload protection: 600V RMS
thermocouple accuracy: Not specified
Diode test
overload protection test current (typical) open circuit Voltage range
600V RMS 0.25mA < 1.6V DC 2.0V DC
continuity test
overload protection open circuit Voltage
600V RMS Appx. 0.44V
testing Fuses
• “O.L.” indicates blown fuse.
WarraNtY
www.kleintools.com/warranty
cLEaNING
Turn instrument off and disconnect test leads. Clean the instrument by using a damp cloth.
Do not use abrasive cleaners or solvents.
StoraGE
Remove the batteries when instrument is not in use for a prolonged period of time. Do not
expose to high temperatures or humidity. After a period of storage in extreme conditions
exceeding the limits mentioned in the Specifications section, allow the instrument to return
to normal operating conditions before using it.
DISpoSaL / rEcYcLE
caution: This symbol indicates that equipment and its accessories shall
be subject to a separate collection and correct disposal.
MaX/MIN rEL HoLD
1000V
10A
Dwg Name: MM1000-139543TART Dwg No: 139543T
ECO No: 14678 Pkg Dwg Ref: 1650 Rev: B
Color Reference: CEN-PACK-003-A
MM 1000
MM1000 Instruction Manuals - MASTER.indd 1-4 11/20/2013 3:06:42 PM