Kisan Electronics CX-10 - Manual (Page 9)

Page - 7
DISPLAY FACEPLATE
chargeGUARD Display has a detachable faceplate. It can be painted to
match your dash color, or additio
e
ordered separately.
(4) latches, which hold the
faceplate securely to Display housing.
efully
rubber keypad in
(2) latches then pivot the faceplate
toward the top (2) latches.
Once it is flush, push it in plac
the detents hold the faceplate down
securely.
nal faceplates in optional colors can b
There are
Insert a small jewelers screwdriver in
each of the detents to release latch,
one at a time.
Once the faceplate is loose, car
lift it up and away from the Display
housing, leaving the
place.
When reinstalling, first hook the lower
e until
Note! If the keypad is disturbed from it’s location, water barrier seal
can be compromised.