Kinze ISOBUS Electronics Package (4900) Rev. 4/14 - Manual (Page 55)

TM
ISOBUS M0250
Rev. 4/14 51
TASK CONTROLLER
The task controller settings screen contains a checkbox to enable or disable the Task Controller Client. This either
turns on or off the communication to the Task Controller. This defaults to ENABLED, DO NOT DISABLE THIS UNLESS
MAPPING, SECTION CONTROL, and PRESCRIPTION CONTROL IS NOT DESIRED.
The task controller settings screen also contains diagnostic information which includes the ON/OFF status for each
row coming from the Task Controller, the planter model and options that have been loaded to the Task Controller, and
the current work states for the planter.
There is also a row test feature in this screen. Select a row and then select the TEST button. This will turn the Seed
Meter, Insecticide Meter, and Fertilizer Shut-off ON one at a time for that row.
Settings