JUMO 701550 di 308 - Digital Indicator Data Sheet - Manual (Page 2)

2012-05-30/00485042
Data Sheet 701550 JUMO GmbH & Co. KG • 36035 Fulda, Germany Page 2/7
Technical data
Thermocouple input
RTD input
Input for standard signals
Binary inputs
Measuring circuit monitoring
1 The accuracy refers to the max. measurement range span. The linearization accuracy is reduced with short spans.
Designation Measuring range Meas. accuracy 1
(incl. cold junction)
Ambient
temperature error
Fe-Con L
Fe-Con J
Cu-Con U
Cu-Con T
NiCr-Ni K
NiCr-Con E
NiCrSi-NiSi N
Pt10Rh-Pt S
Pt13Rh-Pt R
Pt30Rh-Pt6Rh B
W5Re-W26Re C
W3Re-W25Re D
W3Re-W26Re
Chromel-copel
EN 60584
EN 60584
EN 60584
EN 60584
EN 60584
EN 60584
EN 60584
EN 60584
GOST 8.585-2001
-200 to +900°C
-200 to +1200°C
-200 to
+600°C
-200 to +400°C
-200 to +1372°C
-200 to +1000°C
-100 to +1300°C
-50 to +1768°C
-50 to +1768°C
0 to +1820°C
0 to +2320°C
0 to +2495°C
0 to +2400°C
-200 to +800°C
 0.25%
 0.25%
 0.25%
 0.25%
 0.25%
 0.25%
 0.25%
 0.25% (from 0°C)
 0.25% (from 0°C)
 0.25% (from 300°C)
 0.25%
 0.25%
 0.25%
 0.25%
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
100ppm/°C
Cold junction Pt100, internal
Designation Connection circuit Measuring range Meas. accuracy 1 Ambient
temperature error
3-/4-wire 2-wire
Pt100 EN 60751 2-wire / 3-wire / 4-wire -200 to +850°C
 0.05%  0.4%
50ppm/°C
Pt500 EN 60751 2-wire / 3-wire / 4-wire -200 to +850°C  0.2%  0.4% 100ppm/°C
Pt1000 EN 60751 2-wire / 3-wire / 4-wire -200 to +850°C  0.1%  0.2% 50ppm/°C
Pt50 GOST 6651-94 2-wire / 3-wire / 4-wire -200 to +850°C
 0.1%  0.8%
50ppm/°C
Pt100 GOST 6651-94 2-wire / 3-wire / 4-wire -200 to +850°C
 0.05%  0.4%
50ppm/°C
Cu50 GOST 6651-94 2-wire / 3-wire / 4-wire -50 to +200°C
 0.2%  1.6%
50ppm/°C
Cu100 GOST 6651-94 2-wire / 3-wire / 4-wire -50 to +200°C
 0.1%  0.8%
50ppm/°C
KTY11-6 2-wire -50 to +150°C   2.0% 50ppm/°C
Sensor lead resistance 30  max. per lead for 3-wire/4-wire circuit
Measuring current approx. 250µA
Lead compensation Not required for 3-wire or 4-wire circuit. With a 2-wire circuit, the lead resistance can be compensated
in software by a correction of the process value.
Designation Measuring range Meas. accuracy 1 Ambient
temperature error
Voltage 0(2)—10V
0—1V
Input resistance R
IN
> 100k

 0.05%
 0.05%
100ppm/°C
100ppm/°C
Current 0(4)—20mA, voltage drop
1.5V  0.05%
100ppm/°C
Resistance transmitter min. 100
, max. 4k 4
100ppm/°C
Floating contacts open = not active; short-circuit to GND = active
Transducer Detection of
overrange/underrange
Detection of
probe/lead short-circuit
Detection of
probe/lead break
Thermocouple yes no yes
RTD yes yes yes
Voltage 2 — 10V
0 — 10V
0 — 1V yes
yes
yes yes
no
no
yes
no
no
Current 4 — 20mA
0 — 20mA yes
yes yes
no
yes
no
Resistance transmitter no no yes
In the event of a fault, the outputs move to a defined (configurable) status.