JUMO 705040 mTRON T - Router Module Data Sheet - Manual (Page 5)

2014-04-15/00529103
Data Sheet 705000 Page 5/10
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Input/output modules
• The modules are equipped with removable terminal strips with Push-In technology for the electrical connection.
• All input/output modules operate at a voltage supply of DC 24 V.
• The setup program, the multifunction panel or the optional PLC can be used to comfortably configure and parameterize the modules.
• LEDs are used to indicate the voltage supply as well as the operating status of a module and the input/output statuses.
• For service work (replacement) or adding optional boards, the module insert can be easily pulled out of the case at the front.
Multichannel controller module
Relay module 4-channel
• 2-channel PID controller with relay output or logic output
to control solid-state relays
• Up to 4 PID controller channels can be activated (cascadable)
• Two universal analog inputs, two digital inputs
(DC 0/24 V) and two digital outputs (relay or logic DC 0/15 V)
• Supported measuring probes: Thermocouples, RTD temperature
probes, resistance transmitters, resistance/potentiometers, or
standard signals (current or voltage)
• The analog inputs are electrically isolated from each other
• Three option slots for the extension of up to four
universal analog inputs, eight digital inputs,
three analog outputs, or eight digital outputs
• Supported controller types: Two-state controller, three-state con-
troller, modulating controller, continuous controller, or continuous
controller with integrated actuator controller
• Customer-specific linearization possible by using a formula
• Limit value monitoring
• Four formulae for math and logic functions (option)
• One counting input up to 10 kHz
• The module operates independently (configurable) which means
the control task is carried out even if the base unit or the higher-
ranking system malfunctions
• If the controller is replaced during service work the new controller
(identical type) is automatically configured
• Dimensions (W x H x D): 45 mm x 103.6 mm x 101.5 mm
(without connection elements)
For further information: Refer to data sheet 705010
• Four relay outputs controlled via the system bus by digital signals
• Each relay is equipped with a changeover contact
AC 230 V / 3 A
• Separate terminal strip per relay output
• Automatic configuration after the module insert has been ex-
changed during service work
• Dimensions (W x H x D): 22.5 mm x 103.6 mm x 101.5 mm
(without connection elements)
For further information: Refer to data sheet 705015