JUMO 705040 mTRON T - Router Module Data Sheet - Manual (Page 4)

2014-04-15/00529103
Data Sheet 705000 Page 4/10
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Base units
• The base unit, up to 30 input/output modules, and up to 30 router modules can be used to build a compact and economic central or decentral
measuring, control, and automation system (visualization and operation either with the multifunction panel or the plant visualization software
JUMO SVS3000).
• The base units contain the process image of the application. Furthermore, all configuration and parameter data of the system are stored in these
modules (except for the multifunction panel). As a result, individual input/output modules can be replaced with Plug and Play.
• All base units operate at a voltage supply of DC 24 V.
• The setup program or the multifunction panel can be used to comfortably configure and parameterize the base units.
• LEDs are used to indicate the voltage supply as well as the operating status of a module and of the interfaces.
Central processing unit
Additional base units in preparation.
• The central processing unit is the basis for the maximum exten-
sion of the system
• Nine program generators (option)
• 64 limit values are monitored
• An integrated PLC acc. to IEC 61 131-3 (option)
• Math and logic function (option) for all connected multichannel
controller modules
• Two interfaces for field bus applications; optional:
- RS232, Modbus RTU as master or slave
- RS422/485 Modbus RTU as master or slave
- PROFIBUS-DP as slave (as of system version 02)
• One USB device interface (setup)
• System bus connection at the front (Bus Out)
• A LAN interface (Ethernet) for HTTP and Modbus/TCP as master
and slave
• Integrated web server
• E-mail transmission
• The central processing unit operates at a voltage supply of
DC 24 V and supplies the connected input/output modules
• Dimensions (W x H x D): 135 mm x 101 mm x 67.1 mm
(without connection elements)
For further information: Refer to data sheet 705001