JULABO SC 10000w Eco-Series Recirculating Coolers - Manual (Page 12)

Operator responsibility – Safety instructions
12
Eco- Series
Temperature selection digital
via keypad indication on LED-Multi-Display
remote control via personal computer indication on monitor
Temperature indication °C LED-Multi-Display
Resolution °C 0.1
Electrical connection:
Computer interface RS232
Table 1
Pump capacity
Bath fluid:
Water, Silicone -oil
XX.XX
PUMP
1
XX.XX
PUMP
2
Circulating pump:
P3 P4 P3 P4
Flow rate max. Lpm at 0 bar
30 40 33 43
Pressure max. bar at 0 liter
1.8 2.5 3.5 4.4
Bath fluid: Galden ®
eg. Fluorinert ® 3283
Pressure max. bar at 0 liter
3.5 4.4
Notice:
If Galden ® or Fluorinert ® is used the the charge of the motor increases. Wrong
adjustment causes overheating and eventually destruction of the motor.
With the circulation pump P3 as well as P4 a maximum pump pressure stage
>PUMP 1< may be adjusted.
The pump type can be recognized in the order no. on the name plate.
95 xx xxx _ xx PX xx