JULABO MB-5M Heating Circulators with Open Bath - Manual (Page 23)

MB
23
RS 232
15
A M P
15
A M P
V
JULABO MVS
27
25a 25b
26
By installing the MVS controller (26)
and a solenoid valve (27), sudden
temperature increases can be rapidly
reversed by tap water flowing through
the built-in cooling coil.
For applications requiring constant
near-ambient temperature, tap water is
thus only used in small amounts.
The circulator provides the necessary
control pulse via the connector (22).
Cooling coil connectors
(25a, 25b)
Order No. Description
9 790 000 MVS controller
8 980 700 Solenoid valve
NOTE: Immersion coolers are used for countercooling instead of tap water in
applications below room temperature.
Order No.
Description
9 650 820 FT200
9 650 840 FT400
8 970 400 Clamp for cooler probe for stainless steel or
plexiglass bath tanks
NOTE: Flow-through cooler
Order No. Description
9 655 825 FD200
The FD200 is suitable as cooling device for liquids in closed circuits (loops).
This unit is integrated in the return flow circuit from the external system
connected to a circulator, and continuously withdraws heat from the liquid.
(only MB-5 / MB-5A / MB-7A / MB-5M)