JULABO MB-5M Heating Circulators with Open Bath - Manual (Page 17)

MB
17
5. Preparations
5.1. Installation
Notice:
Plexiglas and Makrolon baths are not resistent to solvents.
Avoid contamination of the bath fluid with solvents.
Top view
A
A
B
 Place the circulator in an upright position.
MB-5A / MB-7A / MB-5M
 The circulator (A) mounted on a stainless steel bridge is
placed on the back of the bath tank.
MB-5
 The circulator (A) mounted on a stainless steel bridge is
placed on the back of bath tank.
Close the bath tank with the bath cover (B).
Top view
 The circulator (A) fitted with a stainless steel bridge is
placed on the right side of the bath tank leaving the bath
open on the left side.
MB-13A / MB-19A
MB-13, MB-17, MB-19

A lift-up bath cover or flat stainless steel bath cover is
available as optional accessory.
Lift-up bath cover:
Order-No. 8970255 Bath tank 13, 17
Order-No. 8970256 Bath tank 19
Flat stainless steel bath cover:
Order-No. 8970290 Bath tank 13, 17
Order-No. 8970291 Bath tank 19