JULABO F1000 Recirculating Cooler - Manual (Page 31)

F250, F500, F1000
1.951.4806-V1 31
When returning the unit:
• Clean the unit in order to avoid any harm to the service
personnel.
• Package the unit carefully and properly.
• Always include a brief description of the problem.
If you send your JULABO unit back to us, please include a
Service Return Note, which you can download at our
website www.julabo.de. Please fill out the form and include
it with the device or fax or e-mail it to us in
advance.
• The unit must be standing upright during
shipment.
• Label the packaging accordingly.
• JULABO is not responsible for damages that might occur
from insufficient packing.
During the repair process, JULABO will perform any upgrades or
technical changes that are necessary to ensure the reliable
operation of the device.
11.1. Draining
Danger of electric shock!
•
Turn off the unit and disconnect the mains cable from the
power source.
Environmental damage caused by improper storage and
disposal of the bath fluid.
Store and dispose the used bath fluid according to the laws for
environmental protection.
F250 F500, F1000
1. Turn off the unit and disconnect the mains
cable from the power source.
2. Prepare a suitable vessel for receiving the
used bath fluid.
3. Turn out the drain screw on the rear of the
unit to drain the bath fluid.
4. Tilt the unit slightly back to drain it
completely.
Close the drain screw after the complete
emptying of the unit.