JULABO F1000 Recirculating Cooler - Manual (Page 26)

Operating procedures
26 1.951.4806-V1
8.7. AUTOSTART ON / OFF
The recirculating cooler has been configured and supplied by
JULABO according to N.A.M.U.R. recommendations. This means
for the start mode, that the unit must enter a safe operating state
after a power failure (non-automatic start mode). This safe
operating state is indicated by „OFF“ on the LED temperature
display. A complete shutdown of the main functional elements
such as compressor and circulating pump is effected
simultaneously.
The set values are stored in the memory, and by pressing the main
switch in manual mode, the device is restored to operation.
Should such a safety standard not be required, the AUTOSTART
function (automatic start mode) may be activated, thus allowing the
start of the circulator directly by pressing the mains power switch
or using a timer.
Keep depressed enter and turn on the unit with the mains power
switch.
For a short while the LED display indicates the effective start
mode:

= AUTOSTART on.

= AUTOSTART off.
Danger from unattended device start.
For supervised or unsupervised operation with the AUTOSTART
function, avoid any hazardous situation to persons or property.
The circulator does no longer conform to N.A.M.U.R.
recommendations.