Intelix DIGI-88B - Manual (Page 14)

DIGI-88B Installation Guide
7. In the “Send Sequences” window, press the Set IP (Use
Wildcards) button.
8. Type the desired IP address in 3 byte sequences,
pressing the Enter key on your keyboard after each
sequence.
9. Verify that the IP address changed
in the communication window. .
*Note – it can take 5-10 seconds
for the unit to report back the
confirmed change.
DHCP IP assignment via RS232
You can change the IP mode to DHCP using RS232
1. Download Docklight and the DIGI-88B from the Intelix website.
2. Connect the included USB -> RS232 adapter to an open USB port on your computer, or if you have
a serial port, connect a straight through serial cable. When using the USB->RS232 adapter for the
first time, device drivers should be automatically installed.
3. Open the Docklight Configuration File.
14