Intelix FLX-8X8A - Manual (Page 14)

FLX-8X8A Installation Guide
14
- S-video connects to the purple connector on the FLX-RBOCB cable.
- Composite video connects to the yellow connector on the FLX-RBOCB cable.
PIN 2
PIN 3
PIN 5
LUMINANCE (Y) +
CHROMINANCE (C) +
LUMINANCE (Y) GND
CHROMINANCE (C) GND
FLX-RBOCB PINOUT
PIN 1 COMPOSITE +
COMPOSITE GND
Analog Audio Wiring
The analog audio inputs and outputs support 20 Hz to 20 kHz balanced stereo audio. A signal that goes
in on the left audio channel will exit on the left audio channel. The analog audio is separate from HDMI-
based audio that may pass through the video portion of the matrix.
L
R
A
U
D
IO Ground
Left (+)
Left (-)
Right (+)
Right (-)
Balanced Audio Input
L
R
A
U
D
IO Ground
Left (+)
Left (-)
Right (+)
Right (-)
Balanced Audio Output
For balanced audio inputs and outputs, the ground wires will need to be connected together.
L
R
A
U
D
IO
Left (+)
Ground
Right (+)
Ground
Unbalanced Audio Input
L
R
A
U
D
IO Ground
Left (+)
Right (+)
Unbalanced Audio Output
For unbalanced audio inputs, a jumper wire is required between the Ground input and the Left (-) and
Right (-) inputs to limit noise from the signal. For unbalanced audio outputs, the ground wires going to
the output device will need to be connected together.