Intelix FLX-8X8A - Manual (Page 13)

FLX-8X8A Installation Guide
13
FLX-RI4 Wiring
For VGA signals, use a standard VGA male to VGA male cable.
VGA PORT ON FLX-RI4
For RGBHV signals, use a standard VGA to RGBHV cable. Below is a common pinout of this type of cable.
PIN 1
PIN 2
PIN 3
PIN 13
PIN 14
SHELL
RED +
GREEN +
BLUE +
HORIZONTAL +
VERTICAL +
RED GND
GREEN GND
BLUE GND
HORIZONTAL GND
VERTICAL GND
RGBHV PINOUT
PIN 1
PIN 2
PIN 3
PIN 13
PIN 14
For component video, S-video, and composite video, a VGA to breakout cable is recommended. The FLX-
RI4 comes with two FLX-RBOCA (component video breakout cable) and two FLX-RBOCB (composite and
S-video breakout cable) cables. See FLX-RI4 Specific Commands on page 20 to define the operation of
the inputs.
- Component video, RGsB, and RsGsBs connect to the appropriate red, green, and blue
connections on the FLX-RBOCA cable.
PIN 1
PIN 2
PIN 3
RED +
GREEN +
BLUE +
RED GND
GREEN GND
BLUE GND
FLX-RBOCA PINOUT
PIN 6
PIN 7
PIN 8