Intelix FLX-8X8A - Manual (Page 10)

FLX-8X8A Installation Guide
10
Output Cards
The modular output cards are keyed on the left side to line up with the input cards and ensure they are
installed correctly in the matrix.
DVI (FLX-DO4)
The FLX-DO4 DVI-D outputs are HDMI and HDCP compliant and support CEC and DDC standards. Each
output is a single link DVI-D connection that can support video resolutions up to 1920x1200.
HDBaseT (FLX-BO4)
The FLX-BO4 takes advantage of HDBaseT outputs connect any source device to a remote display, up to
70 m away, utilizing standard Cat 5e cable with a TIA-568B crimp. The RS232 and wide-band IR
connections for each output allow bi-directional control signals at the equipment rack to interface with
display devices when used with the DIGI-HD70C-R or DIGI-HDE-R HDBaseT receivers. The optional DIGIB-
EMT (IR emitter) and DIGIB-EYE (IR receiver) are required for IR control functionality.
HDMI (FLX-HO4)
The FLX-HO4 HDMI outputs can be routed from any input in the matrix. The HDMI outputs can pass
video signals up to 4k x 2k, including 3D and 48-bit Deep Color at 1080p. Additionally, audio signals from
stereo up to 7.1 audio streams will pass to supported output devices.