INFICON HPG400-SD ATM to Ultra-High Vacuum Gauge (DeviceNet) - Manual (Page 11)

tira03e1-b (0310) BPG/HPG400-SDv1.cp
11
Attribute ID Access Rule NV/
V
Name DeviceNet Data Type Description of Attribute
14 Get V Exception Detail
Warning STRUCT of: A structure of three structures containing
a bit mapped representation of the
warning detail
Common Exception
Detail STRUCT of:
Size 2 USINT Number of Common Detail Bytes
Detail 0 ARRAY of: → "Semantics" section below.
Detail 1 BYTE → "Semantics" section below.
Device Exception
Detail STRUCT of:
Size 6 USINT Number of Device Detail Bytes
Detail 0 ARRAY of: S-Analog Sensor Instance 1 (Pirani)
Status Extension
Detail 1 BYTE S-Analog Sensor Instance 1 (Pirani)
Sensor Warning Byte 0
Detail 2 BYTE S-Analog Sensor Instance 1 (Pirani)
Sensor Warning Byte 1
Detail 3 S-Analog Sensor Instance 2
(hot cathode) Status Extension
Detail 4 S-Analog Sensor Instance 2
(hot cathode) Sensor Warning Byte 0
Detail 5 S-Analog Sensor Instance 2
(hot cathode) Sensor Warning Byte 1
Manufacturer
Exception Detail STRUCT of:
Size 1 USINT Number of Manufacturer Detail Bytes
Detail 0 Byte serial common warning
15 Set NV Alarm Enable BOOL → "Semantics" section below.
16 Set NV Warning Enable BOOL → "Semantics" section below.
101 Get NV Sensitivity USINT → "Semantics" section below.
only HPG400-SD
102 Get NV Emission On
Threshold
INT or REAL → "Semantics" section below.
only HPG400-SD
This attribute represents the current state of the device. Its value changes as the
state of the device changes. The following values are defined:
Attribute Value State
0 Undefined
1 Self Testing
2 Idle
3 Self-Test Exception
4 Executing
5 Abort
6 Critical Fault
In case of a Self-Test Exception restart the device with a reset out of the box
(Identity Object Class 1, Instance 1, Service 5, Service target value: 1).
2.3.2.1 Semantics
Device Status