INFICON TM-400 Thin Film Deposition Monitor - Manual (Page 18)

2 - 4
IP
N 17
88
0
0 Re
v.
B
TM-350/400 Operating Manual
2.3.4 Program Parameters
Film Number. . . . . . . . . . . . . . . . . . . 100 Programmable films
Thickness Endpoint . . . . . . . . . . . . . 0.000 to 999.9 KÅ
Density . . . . . . . . . . . . . . . . . . . . . . . 0.1 to 99.99 gm/cm
3
Acoustic Impedance. . . . . . . . . . . . . 0.50 to 59.99 × 10
-5
gm/cm
2
/sec
Tooling Factor #1 . . . . . . . . . . . . . . . 10.0 to 999.9%
Tooling Factor #2 (TM-400 only) . . . 10.0 to 999.9%
Primary Sensor (TM-400 only) . . . . . 1 to 2
2.3.5 Input Capability
Discrete Inputs . . . . . . . . . . . . . . . . . TTL level inputs activated by a short across
the input pins (min 200 ms pulse): Start, Stop,
Film Number, Increase, Decrease
2.3.6 Output Capability
Source Shutter Relay . . . . . . . . . . . . One Single Pole Single Throw Relay,
120 VA, 2A Max
Sensor Shutter Relay . . . . . . . . . . . . (TM-400 only.) One Single Pole Single Throw
Relay, 120 VA, 2A Max
Digital to Analog Converter . . . . . . . Rate and Thickness; 0 to 5 V(dc), 11 bit
resolution, 2 or 3 Decade range
2.3.7 Other
Input Power Requirements. . . . . . . . 100, 120, 200, 240 V(ac); 50/60 Hz; 25 watts
Fuse Rating . . . . . . . . . . . . . . . . . . . IEC T-Type (Slow), 4/10 A, 250 V(ac)
Operating Temperature Range. . . . . 0 to 50°C
Physical Size . . . . . . . . . . . . . . . . . . . . Instrument Case 3.47” H × 8.4” W × 9.7”D
19” Rack-mount case 3.47” H × 19” W × 9.7” D