INFICON I/O1000 I/O module - Manual (Page 15)

Installation and removal 15
5 Installation and removal
5.1 Mounting of I/O module
 DIN-TS35 top hat rail
1 Hook unit on top hat rail at bottom.
2 Press unit onto top hat rail at top.
5.1.1 Establish connections
Connecting I/O module with MSB box
The I/O module communicates via data cable with the mass spectrometer module
and is supplied with voltage by the data cable.
 Data cables from INFICON
1 Connect I/O module (connection L D ) via data cable with MSB box (connection I/
O A NYBUS ).
2 Connect I/O module via desired interfaces with external controller:
– RS232 (RS-232 interface)
– RS485 (RS-485 interface)
– A NALOG I N (analog input)
– A NALOG O UT (analog outputs)
– P LC I N (digital inputs)
– P LC O UT (digital outputs)
Fig: 6 Mount bus module on DIN
-
TS35 top hat rail