INCRA CleanSweep User Manual
Incra cleansweep, Lean, Weep
Manufactured by Taylor Design Group, Inc. P.O. Box 810262 Dallas, TX 75381
©2013 by Taylor Design Group, Inc. All rights reserved.
w w w . i n c r a . c o m
Owner’s Manual
INCRA CleanSweep
Downdraft Dust Collection Cabinet
C
LEAN
S
WEEP
Downdraft Dust Collection Cabinet
Downdraft Dust Collection Cabinet
°
Before using the INCRA CleanSweep, read and follow all instructions and safety information in this manual.
°
Before using the INCRA CleanSweep in conjunction with any other tool, first read and follow all instructions and safety
information in that tool’s owner’s manual.
°
When making any cut, always use a push stick, rubber soled push block, or other safety device to keep your hands safely away
from the cutting tool.
°
Always wear safety glasses, hearing protection and follow all normal shop safety practices.
°
AVOID OVERHEATING YOUR ROUTER BY PROVIDING ADEQUATE VENTILATION. Make sure your dust
collection system is turned on and working properly whenever your router is operated inside the CleanSweep Cabinet. If you
operate your router inside the CleanSweep Cabinet with your dust collector turned off or not working properly, you MUST first
follow the 3 steps below.
1)
Open the CleanSweep Door.
2)
Open the Blast Gate Slide.
3)
Remove the dust collection hose.
Important safety instructions for using the
INCRA CleanSweep
SAFETY: