INCRA Mast-R-Lift II User Manual
Incra, Mast r lift, User manual
Thank you for choosing this product from
JessEm Tool Company. We appreciate your
support and hope that our product serves you
well. This product is designed to provide
many years of reliable service provided it is
used as intended and taken care of.
This user manual will assist you in assembly
and general operation of this product. It is
not our intent to teach you about
woodworking. It is assumed that you are an
experienced woodworker with the basic skills
and experience necessary to use this product
safely. If after reading the following
instructions, if you are unsure or
uncomfortable about safely using this
product we urge you to seek additional
information through widely available
woodworking books or classes.
Suggested Router Bit Speeds
Bit Diameter
Max. Speed
1” (25mm)
24,000 RPM
1-1/4” - 2” (30-50mm)
18,000 RPM
2-1/4” - 2-1/2” (55-65mm) 16,000 RPM
3” - 3-1/2” (75-90mm)
12,000 RPM
As part of our Continuous Product
Improvement Policy, JessEm products are
always advancing in design and function.
Therefore there may be differences between
what is shown in our catalogs, website or at
retail display and what is sold at time of
purchase. We reserve the right to make
positive changes to our products at our
discretion.
CONTENTS:
1 - Mast-R-Lift™ II
1 - Height Adjustment Handle
10 - 1/4-28 x 1/4” Leveling Set Screws
1 -Start Pin
1 - 3/16” hex key
Also includes:
5 - Magna Lock Insert Rings
1 - 3/32” Hex Key
1 - 1/8” Hex Key
1 - 5/32” Hex Key
1 - 1/4-20 x 1/4” Cam Screw
IMPORTANT!
Read and understand the contents of
this manual before assembly or
operation of this product.
User Manual
Model #02120, 02121
100 Caplan Ave., Units 14 & 15
Barrie, Ontario L4N 9J2
Canada
866-272-7492 Toll Free
705-726-8233 Local Phone
705-726-7519 Fax
Website
Mast
R
Lift
™
II
INCRA