INCRA TS Legs Kit - Manual

1
Assembly Instructions for the INCRA TS Legs Kit
Fig. 1 TS legs kit
Parts List
(2) Aluminum legs
(2) 5/16-18 threaded inserts
(2) Leg levelers
(1) Infeed leg bracket
(1) Outfeed leg bracket
(2) Leg stringers
(18) 1/4-20 x 1/2 hex bolt
(4)
3/8-16 x 1/2 hex bolt
(14) 1/4 square nut
(2)
5/16-18 hex nut
(4) 1/4-20 rectangular nut
(4) 3/8-16 rectangular nut
(20) 1/4” washer
(4)
3/8” washer Leg (2)
Fig. 2 Parts List
Infeed leg bracket
Outfeed leg bracket
Leg leveler
Leg stringer (2)
Infeed leg
assembly
Outfeed leg
assembly
Leg leveler
5/16-18 hex nut
Threaded insert
(factory installed)
Leg
Fig. 3 Leg levelers Step 1. Assemble the
leg levelers
Thread a 5/16-18 hex nut
on each leg leveler, then
install the leveler into the
threaded insert on the
bottom of each leg, Fig 3.
Made in America by:
Taylor Design Group, Inc.
PO Box 810262
Dallas, TX 75381
Phone: 972-242-9975
www.incra.com