Safety, Safety fasteners – INCRA TS-II Table Saw Fence User Manual
Page 2
3
⁄
8
– 16 x 1
1
⁄
2
"
hex bolt
3
⁄
8
"
flat washer
3
⁄
8
"
lock washer
3
/
8
– 16
hex nut
3
⁄
8
– 24 x 1"
hex bolt
5
⁄
16
–
18 x 1
1
⁄
2
"
hex bolt
5
⁄
16
"
flat washer
5
⁄
16
"
lock washer
5
⁄
16
– 18
hex nut
2
■
Before using the INCRA TS II, read and follow all of
the instructions and safety information in this manu-
al.
■
When using the INCRA TS II in conjunction with any
other tool, first read and follow all instructions and
safety information in that tool’s owner’s manual.
■
Never let any part of the INCRA TS II interfere with
another tool’s safety guards or other safety equip-
ment.
■
Before using your INCRA TS II, make sure all
mounting screws are tight and that the black clamp-
ing knobs are securely tightened to the rails.
■
Always turn off the power and make sure that the
blade is fully stationary before changing the setting
on any part of the INCRA TS II.
■
Always keep both hands behind the fence when
moving the INCRA TS II to a new setting.
■
Before making a cut, always make sure that the car-
riage clamp is fully engaged and that the
rail hook thumbscrew is securely tightened.
■
Use appropriate safety devices. Keep hands clear
of the saw blade! Always use a push stick, rubber
soled push block, or other safety devices to keep
your hands safely away from the saw blade.
■
Never let the saw blade come into contact with any
part of the INCRA TS II or INCRA Jig Ultra.
■
Wear safety glasses, hearing protection, and follow
all normal shop safety practices.
■
Never operate your table saw without a blade guard.
SAFETY
FASTENERS
(actual size)
Mounting Bracket Hardware Pack
Contents:
6 ea. ......
3
⁄
8
–16 x 1
1
⁄
2
" hex bolt
4 ea. ......
5
⁄
16
–18 x 1
1
⁄
2
" hex bolt
2 ea. ......
3
⁄
8
–24 x 1" hex bolt (Delta
Unisaw)
6 ea. ......
3
⁄
8
" flat washer
4 ea. ......
5
⁄
16
" flat washer
6 ea. ......
3
⁄
8
" lock washer
4 ea. ......
5
⁄
16
" lock washer
6 ea. ......
3
⁄
8
–16 hex nut
4 ea. ......
5
⁄
16
–18 hex nut
Note: Extra hardware is provided
in this pack to ensure compatibility
with a wide variety of table saws.
Only four of the bolts will be used
in a typical installation.
Important safety instructions for using the INCRA TS II.