HYDAC HLB 1400 - Manual (Page 14)

Instruction Manual HYDACLab ® 03.03.2008
14
13. Functionality of the HYDACLab
®
HLB 1008-1C-001-F1 (programmable)
additional to that of the standard model
In addition to the standard functions it is possible to configure the HYDACLab
®
, modification no.
001 under menu point "Sensor dialogue" with the aid of the HMG 3000 and the PC software
CMWIN.
The following menu guide applies, and is identical in both HMG 3000 and in the PC-Software
CMWIN:
13.1 Main Menu
The HYDACLab ® supports German, English and French. It is possible to make the following
settings on the sensor via the main menu:
Reset the sensor (Reset via the software):
Reset sensor to start a new referencing phase
Output 1:
Configure output 1 as analogue or switching output
Output 2:
Configure output 2 as analogue or switching output
Restart system:
Re-start the sensor (software reset of the microcontroller)
Main menu
Reset sensor
Restart system
Output 1
Analogue output
Switching output
Trend
Output 2
Analogue output
Switching output
Sequence