HYDAC HLB 1400 - Manual (Page 12)

Instruction Manual HYDACLab ® 03.03.2008
12
12. Display Units
12.1 HDA 5500-0-2-zC-006
The HDA 5500, modification no. 006, is a display unit with 4
programmable switching outputs, which have been specially
designed for use with HYDACLab
® sensors.
It is possible to display the actual measured values using the
HDA 5500.
Part no.: 909926 HDA5500-0-2-DC-006(CM1k)
Connecting to a HDA 5500
X1:
Pin 1: + supply HDA 5500
X1: Pin 2: - supply HDA 5500
X1:
Pin 1: +12V supply HYDACLab (brown)
X1: Pin 2: GND HYDACLab (blue)
X2: Pin 7: Analogue output HYDACLab (black)
X2: Pin 11: NC (white)
12.2 HMG 510
Portable 2-channel digital recorder, specially designed for use with HSI and SMART sensors.
It is possible to display the actual measured values on the HMG 510 display.
Part no.: 909889 HMG 510-000
Connecting to a HMG 510
Remove the supply cable from the electrical connection of the HYDACLab
® and screw the
blue Y adaptor for HLB "ZBE 26" to the sensor. Reconnect the supply cable to connection A of
the Y adapter and connect connection B using a sensor cable ZBE 30-0z to input A or B of the
HMG 510.
+U
b
B A