beautypg.com

GeoDesy FSO Next series User Manual

Page 33

background image

GeoDesy Kft.
H-1116 Budapest, Kondorfa str. 6


Even if you have one laerhead attached to one
network you can generate traps without, causing any problems, with the testing.

For these testing purposes please set Alarm1 to RS485(this will generate traps), and
Alarm2 Alarm3 to transmitter(this wont generate traps, so wont disturb the testing)


On figure 2 the settings can be seen.
Change the Trap address to the MGM console IP address which will have the
SMNPc installed
Enabled must be set to on the function will disable the SNMP agent.

After this was set the GD view is ready to send out the Trap messages, to the Trap
Addressed PC

7.4.1 SNMPc Installation


First run snmpc600eval.exe file from the CD.

















Run through the setup process by clicking next

Telefon: 06

. 6-8.


E-mail: info@geodesy

http://www.

33

Even if you have one laerhead attached to one GD-View, or you are on the live

you can generate traps without, causing any problems, with the testing.

For these testing purposes please set Alarm1 to RS485(this will generate traps), and
Alarm2 Alarm3 to transmitter(this wont generate traps, so wont disturb the testing)

2. Figure

On figure 2 the settings can be seen.
Change the Trap address to the MGM console IP address which will have the

Enabled must be set to on the function will disable the SNMP agent.

view is ready to send out the Trap messages, to the Trap

SNMPc Installation

First run snmpc600eval.exe file from the CD.

Run through the setup process by clicking next

Telefon: 06-1-481-2050

Fax.: 06-1-481-2049

[email protected]

http://www.geodesy-fso.com

View, or you are on the live

you can generate traps without, causing any problems, with the testing.

For these testing purposes please set Alarm1 to RS485(this will generate traps), and
Alarm2 Alarm3 to transmitter(this wont generate traps, so wont disturb the testing)

Change the Trap address to the MGM console IP address which will have the

Enabled must be set to on the function will disable the SNMP agent.

view is ready to send out the Trap messages, to the Trap