Gamber-Johnson 7160-0464 - Manual

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.D INST-590
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
STORAGE POCKET SLOTS TO ACCESS THE HARDWARE
HOLDDOWN
SLOTS TO ACCESS
HOLDDOWN HARDWARE
INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec: PS-001 Console Pocket
7160-0464
The 7160-0464 Console Pocket is designed to be attached to passenger side of
the 2015 Chevy Tahoe (7160-0548) console box (and newer console boxes)
without drilling.
For older console boxes, the pocket could be attached to the side of the console
box by field drilling four 1/4" dia. holes to align with the 4 holes on the storage
pocket.
Attach the storage pocket to the console box with the hardware provided in
hardware bag 7120-0597.
Slots are provided on the storage pocket to access the hardware to
attach/detach holddowns or storage pocket using a screw driver.
TOOLS NEEDED: Phillips Screw Driver, 3/8 Wrench/Socket (for field-drill set up)
2015 TAHOE BOX WITH STORAGE POCKET