Gamber-Johnson 7160-0281 - Manual (Page 2)

WARNING
• The components added to the 2011+ Ford Super Duty Vehicle Base should not be positioned in the area where
the airbag may be deployed if it is activated.
• DO NOT position the equipment in front of an airbag. Equipment positioned in front of an airbag may cause
serious injury or death if an airbag is activated.
• If installation of the equipment requires that the equipment be placed in front of an airbag, the airbag should
be deactivated. In order to secure permission for deactivating the airbag you must contact the National
Highway Traffic Safety Administration at 1-800-424-9393. If you have any questions or need assistance, call
Gamber-Johnson at 1-800-456-6868.
• High speed vehicle turns may cause the moving parts of the assembly to swivel, interfering with the driver or
other equipment.
Sheet 2 of 2
FIG. 2
Ford Super Duty Base Installed
Mounting Base in vehicle: (See figure 2)
3. Insert and tighten the front seat bolts. Tighten the rear seat bolts. This completes the main installation
of the Ford Super Duty Vehicle Base. Add mounting step, lower pole, upper pole, motion attachment and
docking solution as needed.
4. It is highly recommended to use a Support Brace (Gamber-Johnson p/n 7160-0230) connected to the
lower pole to minimize vibration in the assembly.