Gamber-Johnson 7160-0036 - Manual (Page 2)

A LAC-03 support base is strongly
recommended for extra stability.
Attach LAC-03 support brace between lower
tube assembly and seat base.
On 2007 and newer vehicles an existing
hole in the seat base can be used as a
mounting point.
•The Upper Pole, Motion Attachment and Dock or Cradle should not be positioned in the area
where the airbag will be deployed if it is activated. DO NOT position the equipment in front of
an airbag. Equipment positioned in front of an airbag can cause serious injury or death if an
airbag was activated, such as in an accident.
•If installation of the equipment requires that the equipment be placed in front of an airbag,
deactivate the airbag in the vehicle so it cannot be activated in an accident. In order to
secure permission for deactivating the airbag in these cercumstances, contact the National
Highway Traffic Safety Administration at 1-800-424-9393 to gain permission to do so. If you
have any questions or need assistance, call Gamber Johnson at 1-800-456-6868.
•High speed vehicle turns may cause a Motion Attachment product to swivel, interfering with
the driver or other equipment.
Complete the install by attaching upper
pole, motion attachment and dock or
cradle assemblies as required.