Gamber-Johnson 7160-0062 - Manual (Page 2)

WARNING
•The Toyota Tundra Vehicle Base should not be positioned in the area where the airbag may be
deployed.
•DO NOT position the equipment in front of an airbag. Equipment positioned in front of an airbag
may cause serious injury or death if an airbag is activated.
•
If installation of the equipment requires that the equipment be placed in front of an airbag,
the airbag should be deactivated. In order to secure permission for deactivating the airbag
you must contact the National Highway Traffic Safety Administration at 1-800-424-9393 to
gain permission to do so. If you have any questions or need assistance, call
Gamber-Johnson at 1-800-456-6868.
•
High speed vehicle turns may cause parts of the assembly to swivel, interfering with the
driver or other equipment.
4. Once the vehicle base is in position, replace the front seat bolts. Tighten the rear seat
bolts. This completes the installation of the '07 and newer Toyota Tundra Vehicle Base.
To complete the mounting system, see Gamber-Johson's full line of Lower and Upper Pole
assemblies, Motion Attachments, computer cradles and docking stations (all sold
seperately).
Sheet 2 of 2