beautypg.com

Automatic water conditioners – Flint & Walling CSM, CVSM Two-Tank Water Softeners User Manual

Page 6

background image

6

remier

remier

roducts

roducts

P

P

P

P

WATER TREATMENT

®

Automatic Water Conditioners

Premier Products Water Treatment | 95 North Oak St. | Kendallville, IN 46755 | 800-545-2206 | flintandwalling.com
Copyright © 2011 Flint & Walling All Rights Reserved.

If the system has called for a regeneration
that will occur at the present time of
regeneration, the words “REGEN TODAY” will
appear on the display.
When water is being treated (i.e. water
is flowing through the system), the word
“SOFTENING” flashes on the display.

REGEN TODAY will be
displayed if a regeneration
is expected “Tonight.”

IL1067

STEP 1U

STEP 2U

STEP 3U

IL1068

AM

PM

Set Time of Day
The user must set the time of day. Time of day should only need to be
set initially, and after power outages lasting more than 8 hours, if the
battery has been depleted and a power outage occurs, or when daylight
saving time begins or ends. If a power outage lasting more than 8 hours
occurs, the time of day will flash on and off, which indicates the time of
day should be reset. If a power outage lasts less than 8 hours and the time
of day flashes on and off, the time of day should be reset and the battery
replaced.
STEP 1U - Press SET CLOCK
STEP 2U - Current Time (hour): Set the hour of the day using  or 

buttons. AM/PM toggles after 12. Press NEXT to go to step 3U.
STEP 3U - Current Time (minutes): Set the minutes of the day using 

or  buttons. Press NEXT to exit Set Clock. Press REGEN to return to

previous step.
Power Loss
If the power goes out, the system will keep time for up to 8 hours or until
the battery is depleted. If a power outage of more than 8 hours occurs,
the time of day will flash on and off, which indicates the time of day
should be reset. The system will remember the rest. If a power outage
lasts less than 8 hours and the time of day flashes on and off, the non-
rechargeable battery should be replaced.
Error Message
If the word “ERROR” and a number are alternately flashing on the
display, contact the installer for help. This indicates that the valve was not
able to function properly.

IL1069