Feiss WB1206 - Manual

(E) REV: 12/03
READ ALL INSTRUCTIONS
BEFORE ASSEMBLING LAMP
Carefully unpack lamp parts onto carpeted surface
or blanket and identify all parts.
1. Place Iron Frame onto Socket.
2. Place Glass Shade into Iron Frame. Secure by placing
Spacer Tube onto Socket.
3. Secure Glass Shade into place by fastening Counter
Ring onto Socket over Spacer Tube.
4. Screw Font onto Lamp Body.
5. Install a Type B, 60 Watt Max. Candelabra Base Bulb
(not included) into Socket as noted on relamping label at
Socket area.
6. ELECTRICAL PLUG IN:
Option 1: Plug onto existing wall outlet
receptacle: Run wall bracket electrical wire down wall
and plug into existing house wall outlet. Attach
cord cover assembly to wall using supplied plastic
anchor's. (see option 1)
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit
contact a qualified electrician. Never use with a
extension cord unless plug can be fully inserted. Do
not attempt to defeat this safety feature.
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
A
SSEMBLY
I
NSTRUCTIONS
F
OR WB1206LBR
Bulb (not included)
Counter Ring
Spacer Tube
Glass Shade
Socket
Lamp Body
Iron Frame
Cord
Q-1333
WB1206LBR
Font
FIG. 1 (OPTION 1)
(6) Plastic Anchor
(6) Sheet Metal
Screws
(3) Inside Cover
(With Holes)
(4 Pcs)
Outside Cover