Feiss VS38002 - Manual

1
Installation Instructions for
Lucas 2 Light Vanity Strip
1.0
VS38002
CAUTION - RISK OF FIRE
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURN THE POWER TO THE ELECTRICAL BOX OFF.
Wall
VS38002_
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Secure the mounting plate to the electrical box with the two provided mounting plate screws.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the set screws.
Install the shade by placing the shade, spacer, and collar nut over the socket, then using the shade tool to secure
them.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
1
2
3
4
5
6
1A
LAMP
COLLAR NUT
SHADE
7
NEUTRAL WIRE
WHITE WIRE
HOT WIRE
BLACK WIRE
ELECTRICAL BOX
MOUNTING
PLATE
1
1
5
MOUNTING
PLATE SCREW
SET SCREW
7
6
SPACER
SOCKET
SHADE TOOL