Feiss VS4000_ - Manual

1
Installation Instructions for
Colby 1, 2, 3, and 4 Light Vanity Strip
1.0
VS4000_
Wall
VS4000_-_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Note: For single light fixture, mounting plate studs must face horizontally.
Install the shade by placing it over the socket and onto the shade base.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
If necessary, repeat steps 2 and 3 for remaining shades.
1
2
1A
LAMP
3
3
SHADE
SOCKET
1
2
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SHADE BASE
MOUNTING
PLATE STUD