Feiss OL18011 User Manual
Lumiere' 1 and 2 light outdoor wall lantern, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Lumiere' 1 and 2 Light Outdoor Wall Lantern
1.0
OL18000-OL18011
Outdoor
OL18000, OL18011_
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for wet locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Temporarily remove the decorative cap, nut, and cover from the threaded pipe.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Screw the lamp(s) into the socket(s). Refer to the label on the lamp socket for Max Wattage information.
Install the glass panels by carefully sliding them into the fixture.
Reinstall the cover, nut, and decorative cap onto the threaded pipe.
1
2
1A
LAMP
3
SOCKET
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2
CAP NUT
FIXTURE
COVER
DECORATIVE CAP
NUT
GLASS PANEL
THREADED PIPE
3
FIXTURE
4
COVER
DECORATIVE CAP
NUT
5