Feiss OL18013 User Manual
Lumiere' 1 light outdoor wall lantern, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Lumiere' 1 Light Outdoor Wall Lantern
1.0
OL18002-OL18013
Outdoor
OL18002, OL18013_
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for wet locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Temporarily remove the socket assembly from the fixture by removing the screws from the inside of the fixture.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the glass panels by carefully sliding them into the fixture.
Reinstall the socket assembly by screwing in the screws from the inside of the fixture.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
1
2
1A
LAMP
3
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2
CAP NUT
FIXTURE
GLASS PANEL
5
FIXTURE
4
SOCKET
ASSEMBLY
5
SCREW
SCREW
SOCKET
ASSEMBLY
1
4
4