Feiss OL9208 - Manual

1
Installation Instructions for
Menlo Park 1 Light Outdoor Post Latern
1.0
OL9208
CAUTION - RISK OF FIRE
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURN THE POWER TO THE ELECTRICAL BOX OFF.
Outdoor Post
OL9208_
G P I : ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with post screws.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the inner shade to the fixture base and secure it by tightening the counter ring.
Install the outer shade over the inner shade and secure it in place by installing the fixture top with cap nuts.
1
2
3
1A
CAP NUT
INNER SHADE
FIXTURE BASE
4
COUNTER RING
OUTER SHADE
FIXTURE TOP
7
7
5
6
7
HOT WIRE
BLACK WIRE
POST SCREW
NEUTRAL WIRE
WHITE WIRE
4
2
FIXTURE
POST
3
4
5
6
6
7