Feiss P1204 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulb
not included.
1. Slip fixture loop through fixture wires and then secure by
screwing onto top of fixture.
2. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture then hire a qualified electrician to create one.
3. A. Slip candle tube onto sockets.
B. Install candle follower on top of candle tubes.
C. Install light bulb (not included). See relamping label at
socket area for type and maximum allowed wattage.
4. A. Slide glass shade through fixture until it checks onto
upper section of fixture. Then secure into position by
fastening with a washer and a hex nut. IMPORTANT: DO
NOT OVER TIGHTEN.
B. Install font by fastening with finial.
C. Install hanging drop by hooking onto finial.
Assembly Instructions For
P1204
(E) 10/09
1
3A
3B
3C
2
4A
4B
4C