Feiss P1285 - Manual

1
Installation Instructions for
Holloway 1 Light Pendant
1.0
P1285
Pendant
P1285_
Place the shade housing over the socket assembly and screw the socket assembly to the stem assembly.
Place the shade into the socket assembly and secure it by tightening the collar nut.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
LAMP
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3
4
COLLAR NUT
1
SHADE
SOCKET ASSEMBLY
SHADE HOUSING
STEM ASSEMBLY
1
2
3
4