Feiss P1315 User Manual
Soros 1 light pendant, Installation instructions for, Pendant p1315

1
Installation Instructions for
Soros 1 Light Pendant
1.0
P1315
Pendant
P1315_
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Determine the height of the fixture with the provided stems and washers, then assemble them by screwing them together.
Place the stem cup on top of the stem assembly and secure it in place by tightening the fixture loop.
Feed the fixture wires through the stems, place the decorative cup onto the top of fixture, and secure it by screwing the
stem assembly onto the fixture.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the decorative strands by hooking them to the top and bottom of the fixture as shown on drawing.
Open the quick link and secure it onto the canopy and fixture loop by closing it, then feed the fixture wires through the
quick link and canopy.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
LAMP
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
DECORATIVE
STRAND
DECORATIVE CUP
STEM CUP
WASHER
FIXTURE LOOP
CANOPY
STEM
4
5
6
7
4
5
1
1
1
1
2
3
7
6
QUICK LINK