Feiss P1325 - Manual

1
Installation Instructions for
Audrie 4 Light Mini-Pendant (LED)
1.0
P1325
Pendant
P1325_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry locations only.
This instruction shows a typical installation.
Determine the height of the fixture with the provided stems and connectors, then assemble them by screwing them
together.
Secure the mounting plate to the electrical box with two mounting plate screws.
Feed the fixture wires through the stems and screw the stem assembly to the pendant.
Feed the fixture wires through the canopy and screw the canopy onto the stem assembly.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the red and blue driver wires to the appropriate fixture wires with wire nuts.
Connect the white driver wire to the neutral power line wire with a wire nut.
Connect the black driver wire to the hot power line wire with a wire nut.
Neatly place the driver and wires into the electrical box and/or canopy, then place the canopy onto the mounting plate and
secure it in place by screwing in the fixture screws.
1
2
1A
PENDANT
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
SCREW
3
4
5
3
MOUNTING
PLATE
CANOPY
STEM
6
7
8
1
4
CONNECTOR
9 9
DRIVER
CANOPY
9
6
6
1
1
7 8