Feiss F2914-12 User Manual
Malia 12 light chandelier, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Malia 12 Light Chandelier
1.0
F2914-12
Chandelier
F2914/12_
Install the candle follower to the socket.
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the spacer and stem onto the fixture by screwing them to the threaded nipple.
Install and secure the string of beads by hooking them to the top and bottom of the fixture as shown on drawing.
Hook the support chain to the bottom of the fixture and to the jewel support, then hook the string of beads to the jewel
support and hang the jewel.
Place the fixture top over the fixture loop.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1A
7
1
2
4
LAMP
FIXTURE
SUPPORT
CHAIN
STRING OF
BEADS
JEWEL
1
2
3
4
5
6
CANDLE
FOLLOWER
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
STRING OF
BEADS
STEM
JEWEL
SUPPORT
7
FIXTURE TOP
FIXTURE
LOOP
SPACER
4
5
5
5
3
BOTTOM
TOP
6