Feiss F2707-6 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1. Choose desired installation height from
dimensions shown in above diagram. Thread
fixture wire through each stem to be used.
Please note correct position of stems from left
diagram. Screw all stems together until secure.
2. Slip fixture loop through fixture wires, then
install by screwing on top of stems.
3. This fixture is supplied with a threaded chain
link. The link is opened and closed by twisting
cylinder on chain link. The threaded chain link
should be installed onto the fixture loop and the
other should be installed onto the canopy loop.
4. Follow enclosed supplement installation
instructions for electrical and fixture installation
onto house outlet box. If you do not have an
outlet box at desired location to attach the
fixture then hire a qualified electrician to create
one.
5. Install bulb (not included). See relamping label
located near socket area for type and maximum
allowed wattage.
6. Place glass plate onto frame and secure with
washer and knob.
Assembly Instructions For
F2707/6
(E) 11/11
Adjustable Heights:
23-12", 29-1/2", 35-3/4", 41-3/4",
48-1/8", 54-1/8", 60-3/8", 66-3/8", 72-3/4"
EXTRA x 2 x 4
1
2
3
4
5
6