Feiss F2900-2 - Manual

1
Installation Instructions for
Hugo 2 Light Chandelier
1.0
F2900-2
CAUTION - RISK OF FIRE
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURN THE POWER TO THE ELECTRICAL BOX OFF.
Chandelier
F2900-2_
G P I : ENERAL RODUCT NFORMATION
This product is suitable for dry indoor locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
NOTE: Once fixture loops have been screwed to the canopy, ensure that the canopy hex nuts are tightened.
Determine desired width of extendable arms, then loosen and tighten screws as needed.
Install the shade and secure it to the socket with the counter ring.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Open chain link and secure it to the fixture holes by closing the link.
1
2
3
LAMP
COUNTER RING
4
5
5
SCREW
1
FIXTURE LOOP
CHAIN LINK
EXTENDABLE ARMS
SHADE
SOCKET
FIXTURE HOLE
3
4
2