Feiss F2933-7 User Manual
Caprice 4, 7, and 9 light chandelier, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Caprice 4, 7, and 9 Light Chandelier
1.0
F2932-4-F2933-7-F2934-9
Chandelier
F2932/4, F2933/7, F2934/9_
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Install the upper cover by placing it over the upper cup nipple and securing it in place by tightening the cover nut.
Insert the lower cup nipple into the fixture, then place the lower cover over the lower cup nipple and secure them in place
by tightening the finial.
Install the candle tube by slipping it through the socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade by placing it over the lamp. Repeat steps 3-5 for remaining sockets.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Hang the jewels by hooking them to the fixture as shown on drawing.
1
2
1A
LAMP
3
6
SHADE
SOCKET
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
JEWEL
LOWER
CUP
4
3
UPPER CUP
CANDLE TUBE
5
2
1
FIXTURE LOOP
UPPER
COVER
LOWER
COVER
COVER
NUT
FINIAL
6
7
5
2
7
7