Feiss 10236 - Manual

1
1 Light Table Lamp
1.0
10236
Table Lamp
10236_
1A
Screw the socket assembly to the fixture base.
Install the harp by inserting it in the yoke.
Install lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
Unscrew the finial from the harp and remove the washer.
Install the shade by placing it over the threaded nipple, re-installing the washer, and re-tightening the finial to secure the
shade.
1
2
3
2
SOCKET ASSEMBLY
FINIAL
THREADED NIPPLE
SHADE
FIXTURE BASE
YOKE
5
3
HARP
WASHER
4
4
5
1
G P I : ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
Assembly Instructions for
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of
electric shock.This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit contact a qualified electrician.
Never use with an extension cord unless plug can be fully
inserted. Do not attempt to defeat this safety feature.