Feiss F2546 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Slip column through fixture wires and then secure by
screwing on top of fixture.
2. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture then hire a qualified electrician to create one.
3. Hook decorative chains first onto the column and then
proceed to hook onto arms.
4. Install long threaded pipe by screwing onto bottom of fixture.
5. Install type-B, candelabra base, of 40 Watt maximum bulbs
(not included) onto sockets located at main center body.
6. A. Slip center shade through long threaded pipe until it
securely checks into bottom of fixture. Secure into position
by fastening with a flat washer and hex nut. Do not over
tighten.
B. Install font by fastening with finial.
C. Install hanging drop by hooking onto finial.
7. Install side shade onto fitters by fastening with spacer tube
and counter ring. Use supplied wrench to tighten counter
ring.
8. Install type-B, candelabra base, of 60 Watt maximum bulbs
(not included) onto sockets.
Assembly Instructions For
F2546/6+2
(E) 11/09
7
6A
5
4
1
6C
6B
8
3
2