Feiss F2423 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulb not included.
1. Carefully thread fixture wire through fixture loop. Screw
fixture loop onto top threaded pipe until secure.
2. A. Open all arms so they are equally spaced apart to each
other.
B. Secure arms onto bottom ring by fastening with screws.
3. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture than hire a qualified electrician to create one.
4. Install shade onto fitters by fastening with spacer ring and
counter ring onto threaded socket.
5. Install bulbs (not included). See relamping label located at
socket area for type and maximum allowed wattage.
Assembly Instructions For
F2423/5
Socket
Bulb
(not included)
Arm
Shade
(E) 11/08
Fixture Loop
Fixture Wires
Fitter
Counter Ring
Spacer Ring
4
2
3
5
1