Feiss F1929 - Manual

(E) 10/04
ASSEMBLY I NSTRUCTI ONS FOR F1929/5
M U R R A Y F E I S S
© MURRAY FEI SS I MPORT LLC.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Socket
Bulb
(not included)
Candle Tube
Arm
Fixture Loop
Short
Threaded Pipe
Cap
Finial
Fixture Wire
& Ground Wire
Carefully unpack and identify all
parts before assembly. Bulbs are not
included.
1. Carefully thread fixture wire through
fixture loop. Screw fixture loop onto top
threaded pipe until secure.
2. Open all arms so they are equally
spaced apart to each other.
3. Install one of two provided threaded
pipe into bottom coupler. Then slide cap
up through threaded pipe and lock
horizontal square tube attached at back
of arms onto its notches. Lock cap into
position by fastening finial.
4. Place candle tubes over candelabra
sockets and screw bulbs (not included)
into sockets to secure. See relamping
label on candle tube for type and
maximum allowed wattage.
5. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto
ceiling outlet box.
Bottom
Coupler